Aqara Edge Hub M300: Aqara Studio, PoE, Matter and Thread at IFA 2026

Edge Hub M300 was one of Aqara's spotlight products at IFA 2026. The Vietnamese source article cites Aqara Docs describing global model HM-G04D as the official hardware controller for Aqara Studio: a local edge hub, multi-protocol gateway, LAN-hosted Studio web server and local automation execution engine.

What does M300 actually do?

According to Aqara Docs cited in the source article, M300 can operate as a Zigbee Gateway, Thread Border Router, Matter Controller/Matter commissioner and Matter Bridge for supported Zigbee devices. Aqara Studio is installed directly on the hub, allowing configuration, management and local execution of multiple automations inside the local network.

See Aqara Edge Hub M300 for the product page.

PoE and Ethernet suit fixed installations

M300 includes 100 Mbps RJ45 Ethernet and IEEE 802.3af PoE. For townhouses, villas or commercial projects, wired networking and PoE can make network-cabinet planning, UPS design and hub placement more deterministic than relying only on Wi-Fi. The source article notes that Aqara Docs gives PoE priority when both USB-C and PoE power are connected.

Aqara Studio runs locally on M300

Aqara describes M300 as a local host server for the Aqara Studio web console and user dashboard, as well as an execution engine for automation and more complex scripts. In real deployments, this can reduce Internet dependence for core logic and allows technicians to configure the system on the LAN. This is a key difference from a consumer hub that functions primarily as a device gateway.

Professional-system integration

The source article cites Aqara Studio architecture supporting Zigbee, Thread, Wi-Fi, Ethernet and professional integration layers such as BACnet/IP, KNX/IP and Modbus depending on project configuration. M300 can therefore fit the role of gateway/edge controller when a project needs to connect wireless Smart Home devices with building automation or centralized management systems.

Do not treat M300 as Hub M3

M300 and Hub M3 are different models. Device limits, physical ports or M3 capabilities should not be used to describe M300. Likewise, Aqara Studio, PoE, microSD, local-server and professional-integration capabilities of M300 should not automatically be attributed to M3.

Vietnam market status

The source article states that Aqara Docs listed sales regions for M300 including mainland China, North America, Europe and Russia at the time of writing. It therefore does not claim that M300 was officially on sale in Vietnam; Vietnam price, distribution SKU and warranty should only be updated when official commercial information is available.

• New projects: reserve Ethernet/PoE and a ventilated hub location early.
• Aqara Studio projects: define network topology, static IP requirements where needed and the protocols that must be integrated.
• Matter/Thread: define whether M300 is the Controller/Border Router or only one layer in the existing architecture.
• If IR is used, place the hub where the IR path to controlled devices is practical.
• Do not use Hub M3 specifications as substitutes for M300 data.
• Finalize Vietnam price and SKU only after distribution is confirmed.

Verification sources recorded in the Vietnamese article